One thermostat screen, two temperature units – making the display work for everyone

One screen, two habits
Ecobee’s Smart Thermostat Enhanced (U.S. market) and Smart Thermostat Premium (U.S. & Canada) both let you toggle the display between Celsius and Fahrenheit in the Settings → Display menu. The change applies to the whole device – the screen shows a single unit for everyone. If the majority of the household prefers Fahrenheit, set that as the system default; if most people are used to Celsius, choose Celsius.
When you need a personal view, the Ecobee app on each user’s phone remembers the unit they selected in the app’s own preferences. The phone display can therefore differ from the wall unit, giving each family member a familiar read‑out while the wall thermostat stays in the globally‑chosen mode. This works for both models; Premium adds optional multi‑user profiles that make the app‑side preference a bit more visible, but the core capability is the same.
Conditional buying judgement
- Choose Smart Thermostat Premium if you already plan to give every adult a personal Ecobee app account and want the extra multi‑user profile UI that Premium provides. The premium price is justified only when the household values that individualized app experience.
- Choose Smart Thermostat Enhanced if a single global unit on the wall is acceptable and you only need the basic app for occasional remote changes. It’s the more economical choice for a family that can agree on one default.
Hand‑over tip Ask the installer to:
- Set the wall unit to the agreed‑upon default before leaving.
- Walk each family member through the app’s temperature‑unit setting, confirming they can see the value they expect on their phone.
- Write a one‑page cheat‑sheet (e.g., “Wall: Fahrenheit – change in Settings; Phone: open App → Preferences → Unit”) and leave it near the thermostat.
If you later discover the default doesn’t suit a new family member, the fix is simply a few taps in Settings – no hardware change needed.
同一块屏幕,两种习惯
Ecobee Smart Thermostat Enhanced(仅美国)和 Smart Thermostat Premium(美、加)都在 设置 → 显示 中提供摄氏/华氏切换。切换后,墙面屏幕只会显示单一单位——全屋统一。多数成员倾向华氏,则设为华氏;多数倾向摄氏,则设为摄氏。
如果需要个人化的读数,Ecobee 手机应用会记住每个账户在应用内选的单位。这样即使墙面固定为一种单位,手机端仍可显示各自习惯的单位。Premium 额外提供多用户配置界面,使这种个人偏好更易管理,但两款机型的基本功能相同。
条件性购买判断
- 选 Premium:家庭中每位成人都会使用自己的 Ecobee 应用,并希望在应用里看到专属单位。Premium 的多用户配置可以让这种需求更直观,费用提升在此情形下有意义。
- 选 Enhanced:全屋可以接受统一的单位,只需用手机偶尔查看个人偏好即可。此时选择更经济的 Enhanced 即可满足需求。
交接要点 请安装人员在完工前:
- 将墙面恒温器调至全家约定的默认单位。
- 为每位成员演示手机 App 中的单位设置步骤,确认他们在手机上看到自己习惯的数值。
- 在恒温器旁留一张简短说明(如“墙面:华氏 – 设置→显示;手机:打开 App → 首选项 → 单位”),方便日后查阅。
若以后有新成员加入,只需在墙面设置里切换一次,或让其在 App 中自行更改,无需更换硬件。